Current PositionsPlastic mould >> extrusion moulds
extrusion moulds
-
- >> Sheet die
- Die Width：200mm-8000mm Material of Body：P20 Voltage ：380V Deckle Type and Width：Wheel/Each Side 150mm Connector Position：Right, Socket
-
- >> Hollow board die
- Die width:2300mm Product thickness:2mm-12mm Material of body:P20 Heating:17 zones Voltage:according to the client’s request
-
- >> Film die
- Die Width:200mm-8000mm Material of body:P20 Feature: 1>.On fast elimination the crystallization technology of mold mouth
-
- >> Board die
- Die Width:200mm-8000mm material of body:P20 Voltage:according to the client’s request
-
- >> Static Mixer
- Production:not limited feature: 1)To each different mixed working condition's has high efficiency
-
- >> Screen Changer
- Introduction:If you look forward to the plastic melt filtering device, is a really high efficiency and durability, then the filter device developed by Jinnuo is your best option. A broad product selection, regardless of hand-rocker type, hydraulic op..
-
- >> Dual piston continuous screen changer
- Production range:within 20T/h feature: 1)Two-step gas exhaust for the hydraulic system to eliminate bubbling.
-
- >> Hot-melt Extrusion Gear Pump
- Introduction:The metering pump produced by Jinnuo is the use of temperature feedback signal and the delivery device. It can accurately control the cycle of screw speed and the metering pump cycle period when the plastic processing .
-
- >> Feedblock
- Introduction:Suits each kind of polymerization plastic, at present the layered can be achieved 20 layers or above. And a wide range of product lines can meet the unique needs of clients with a full range of selection.
-
- >> Feedblock-1
- Introduction:Suits each kind of polymerization plastic, at present the layered can be achieved 20 layers or above. And a wide range of product lines can meet the unique needs of clients with a full range of selection.
- Products List
- Auto Plastic Mould
- >> Automobile Plastic Parts
- >> Motorcycle Plastic Parts
- Home Appliance Mould
- >> TV Plastic part mould
- >> Other home applicance
- Household Commodity Mould
- >> Baby Plastic Parts
- >> Plastic Chair
- >> Plastic Container
- >> Plastic Crate
- >> Plastic Dustbin
- >> Plastic Flower Pot
- >> Plastic Pallet
- Extrusion moulds
- >> T-dies
- >> Feedblock
- >> Gear pump
- >> Screen changer
- >> Static mixer
- Contact us
- TEL:0086-576-84355158
0086-576-84352158
FAX:0086-576-84357158
MOBILE: 0086-15057227888
E-MAIL: info@jnmould.com
WEBSITE: www.jnmould.com
- Home
- |
- About us
- |
- Products
- |
- Production Capacity
- |
- Network
- |
- Feedback
- |
- Contact us
- |
- Old Version
Copyright(c) China Zhejiang HuangYan JinNuo Mould Co., Ltd. 2009-2010 All Right Reserved